call us on: +86-571-86059127  E-mail:  
Uking Industrial Co.,Ltd
Tel: +86-571-86059127
Product Categories
Home > News > Content

Tile Adhesive Use

Uking Industrial Co.,Ltd | Updated: Jan 18, 2017

The first step: wet construction wall, ground, wall, ground must maintain internal dry wall, ground surface to keep smooth, rugged or rough surface of the cement mortar can be used;

Step second: remove dust, oil stains and other grassroots, otherwise it will affect the degree of tile adhesive bonding;

The third step: adjust the adhesive, water ash ratio is about 1:4, mixing evenly. The adhesive should be used within 5~6 hours (the temperature is relatively high, the light is sufficient to run out in less time);

The fourth step: the binder after smear on the back, to lay the tile press, until the tile tile on the plain, 15 minutes can be corrected by moving the position.

Contact Us
Address:5# Building ShenXin Square, 2888 # Jiu Xin Road, Songjiang District, Shanghai City
Tel: +86-571-86059127  Fax:86-571-86059127
Copyright © Uking Industrial Co.,Ltd