call us on: +86-571-86059127  E-mail:  
Uking Industrial Co.,Ltd
Tel: +86-571-86059127
Product Categories
Home > News > Content

Tile Adhesive Steps For Usage

Uking Industrial Co.,Ltd | Updated: Aug 04, 2017

Tile Adhesive Steps for usage

Mention the tile binder, in the decoration industry we all know it, it is the new darling of the material in the decoration. Because it has many advantages, such as super strong adhesion, as well as environmental protection and so on. So how much do we know about tiles? Xiaobian today for everyone to introduce the details of the use of ceramic tile under the tiles and some of the characteristics of the binder, we have to look like to see Oh!

 First, the use of ceramic tile steps

  1. First clean the back of the pre-selected tiles and check the paste base. The base surface should be solid, smooth, clean, non-polluting, loose material, hollowing, etc., with curing agent, release agent, the more smooth concrete surface to be polished rough construction.

  2. Paving before the start should also be in the wall to find the vertical layer on the vertical line to determine the tile out of the wall size line, and pull the horizontal line, so paving can not only do the surface smooth, but also can make the tile horizontal and vertical. To ensure that the base surface should be solid, smooth, clean, pollution-free, loose objects, hollowing, etc., with curing agent, release agent, the more smooth concrete surface to be polished rough construction

  3. With 25kg of Weibang tile powder to add water is about 7 ~ 7.5kg, stir with an electric stirrer into a uniform particle-free mortar, placed 3 to 5 minutes and then stir again. Adhesive material should not be too thick, otherwise it is not easy to spread out, but also should not be too thin, otherwise the tile paste can not be fixed, easy to fall down.

  4. With a tooth doctor scraper evenly scraping on the work surface, each scraping about 1 ㎡, and then rubbing the tile on the face.

  5. If used for deep groove tiles or stone, but also the use of tooth scraper in the back of the brick wipe to ensure full paste paste.

 Second, the characteristics of ceramic tile adhesive

  1, the provincial material, the traditional tile paving per square need to cement 11 ~ 18Kg, and tile adhesive only need 4 ~ 6Kg.

  2, save time, the traditional construction method, a worker can only complete 5 to 8 square days a day, and the use of ceramic tile binder, a worker can complete 30 to 40 square days a day.

  3, save money, each square can save about 40% of the cost.

How can the thick and heavy tiles can be honestly sticking to the wall, or where they want him to go, this requires the help of the tile binder. And on the use of tile adhesive we all know that this is a very important tool in the tile, let Xiaobian to tell you about the use of ceramic tile adhesive.

Copyright © Uking Industrial Co.,Ltd