call us on: +86-571-86059127  E-mail: uking@ukingadhesive.com  
Uking Industrial Co.,Ltd
Tel: +86-571-86059127
E-mail: uking@ukingadhesive.com
Product Categories
News
Home > News > Content

Interior Tile Adhesive In The Adhesive Layer

Edit:Uking Industrial Co.,Ltd   Date:Oct 13, 2017

Interior Tile Adhesive In the adhesive layer

The thickness of the interior tile adhesive is determined by its own material properties. As the indoor tile adhesive has good water retention and the drying speed is relatively slow, the expansion and contraction of the material itself , Which leads to the adhesion between the adhesive layer and the tile, the wall between the expansion and contraction coefficient does not match the interface to reduce the strength of bonding, most likely the emergence of the whole piece of peel off the brick!

What is a thin sticker?

Thin paste the concept of the earliest founded in Germany, is the domestic hot in recent years, rising the new paste tile process. Thin stickers with professional indoor tile adhesive and tooth scraper, in the construction of the first floor of the indoor tile adhesive comb scraped into stripes. And then in order to tile the way to puzzle on the paste in the clay, the use of kneading, squeezing, compaction, positioning of the dry work paste method. The construction process only need to add water, no bubble, than the traditional cement mortar construction efficiency greatly improved, and effectively solve the hollowing, out of brick and other issues, by the major brands in the same sought after.

【Why can not the thickening of the indoor tile adhesive

The thickness of the interior tile adhesive is determined by its own material properties. As the indoor tile adhesive has good water retention and the drying speed is relatively slow, the expansion and contraction of the material itself , Which leads to the adhesion between the adhesive layer and the tile, the wall between the expansion and contraction coefficient does not match the interface to reduce the strength of bonding, most likely the emergence of the whole piece of peel off the brick!

Therefore, if the use of indoor tile adhesive paving tiles occurred in the whole piece of stripping the tragedy, most likely the adhesive layer was too thick.

【solution】

Vertical conditions in the vertical wall under the premise of the indoor tile adhesive usually within 0.5cm within the thickness, you can play the biggest advantage. If the wall is not vertical, the paste layer is too thick to reach more than 2cm, you must first use the cement to flatten the wall so that the vertical flat, dry before using the indoor tile adhesive to paste. And the higher the vertical and flatness of the base surface, the less the amount of the interior tile adhesive, the more cost savings. Use:

Indoor and outdoor for the concrete frame after the removal of the smooth deformation of the steel plate; low water absorption of tiles, antique tiles, cultural stone, polished tiles, artificial stone, natural marble, tiles on the wall, shop floor; Shedding; anti-wall paint cracking yellow; old wall renovation waterproof anti-off.

Construction method:

1, base surface treatment: the grass-roots level to keep clean, solid, no oil, no batik, no dust, no loose things.

2, the construction requirements: the product roll in the tiles, mosaic, marble, artificial stone on the back, that is, brush that paste do not have to wait; there will be no hollowing, shedding phenomenon, safe and easy, is the best alternative to conventional interface agent The outdoor rainy days are forbidden.


Contact Us
Address:5# Building ShenXin Square, 2888 # Jiu Xin Road, Songjiang District, Shanghai City
Tel: +86-571-86059127  Fax:86-571-86059127
E-mail:uking@ukingadhesive.com
Copyright © Uking Industrial Co.,Ltd