call us on: +86-571-86059127  E-mail:  
Uking Industrial Co.,Ltd
Tel: +86-571-86059127
Product Categories
Home > News > Content

Interior Tile Adhesive Construction Should Pay Attention

Uking Industrial Co.,Ltd | Updated: Aug 17, 2017

Interior Tile Adhesive Construction should pay attention

In the use of tile adhesive construction should pay attention to the following:

1. Before the application must first confirm the vertical and flatness of the substrate.

2. Do not mix the dry glue with water.

3. Keep the expansion joints.

4. Paving completed 24 hours before they can enter or fill.

5. The product is suitable for use in the environment of 5 ℃ ~ 40 ℃.

Construction of the wall to be wet (outside the wet dry), and to maintain a certain degree of flatness, uneven or extremely rough parts of the application of cement mortar and other materials leveling; grass-roots must remove the floating ash, oil, wax, so as not to affect the degree of adhesion; Paste the tiles in 5 to 15 minutes after the move can be corrected. Stirred after the tile binder should be used at the fastest speed, the adhesive will be applied after the adhesive paste the back of the brick, and then press the force until the plain so far. Due to different materials and the actual consumption is also different. Tile Binder is characterized by high cohesive force, construction without baking wet wall, good flexibility, waterproof, impermeable, crack resistant, anti-aging good, high temperature, freeze-thaw, non-toxic environmental protection, construction Simple.

The scope of application of ceramic tile adhesives are indoor and outdoor ceramic wall tiles, ceramic mosaic paste, but also for all types of buildings inside and outside the wall, pool, kitchen and toilet, basement and other waterproof layer. For the external insulation system on the surface layer of tile paste, need to wait for the maintenance of a layer of material to a certain strength. Base surface should be dry, solid, smooth, no oil, no dust, no release agent. Tile adhesives or ceramic tile adhesive, also known as ceramic tile adhesive, mainly used for pasting tiles, tiles, floor tiles and other decorative materials, widely applicable to the inside and outside the wall, floor, bathroom, kitchen and other architectural finishes. Its main feature is the high bonding strength, water resistance, resistance to freeze-thaw, anti-aging performance and construction convenience, is a very good bonding material. Tile adhesives, also known as tile adhesives or adhesives, viscose mud and other names, is a modern decoration of the new material, instead of the traditional cement and sand, glue mortar is several times the effectiveness of cement mortar Paste large-scale tile stone, to avoid the risk of brick. Good flexibility to prevent the production of hollowing.

Copyright © Uking Industrial Co.,Ltd